18.Tighten the captive screw to secure the hard drive cage in place. Figure 2-27Tightening the Hard Drive Cage Screw

19.To replace the drive access panel, hold the panel at a slight angle with the inside edge of the panel lower than the outside edge, then slide the screw hole tab on the top inside corner of the panel into the slot on the rear of the computer.

Figure 2-28Replacing the Drive Access Panel

26 Chapter 2 Hardware Upgrades

ENWW

Page 31 Page 33
Page 32
Image 32
HP XZ837UT, 9300 manual 28Replacing the Drive Access Panel Hardware Upgrades
Page 31 Page 33
Top Page Image Contents