HP z557, z555, z552, z545 Using the Remote Control with Your TV, HP Digital Entertainment Center

Using the Remote Control with Your TV

You can use the HP Digital Entertainment Center remote control to change channels and adjust volume if you have a cable box or satellite receiver, have installed the Infrared Transmitter cable, and have configured the remote control after initial power up.

Always point the HP Digital Entertainment Center remote control at the HP Digital Entertainment Center front panel. The infrared remote sensor, behind the front panel window, receives signals from the remote control.

The HP Digital Entertainment Center includes one or two Infrared Transmitter cables (IR blaster) that are required to control one or two set-top-boxes. You must carefully position the Infrared Transmitter cable tip on the set-top- box to ensure the set-top-box receives the IR signal from the HP Digital Entertainment Center. See “Infrared Transmitter Connection” on page 88.

64HP Digital Entertainment Center