HP z555, z557, z552 One Cable TV Box or Digital Cable Receiver, HP Digital Entertainment Center

One Cable TV Box or Digital Cable Receiver

Connect the TV signal source from the Cable TV set-top-box or digital cable receiver (not provided) into the HP Digital Entertainment Center.

If you are using a set-top-box or digital cable receiver with S-video or composite video output, do the following:

1Make sure that a coaxial cable connector from your cable TV source (wall) is plugged into the set-top-box or digital cable receiver In connector.

2Connect a video cable:

aChoose a video out connector:

■ Coaxial (RF)

■ Video (composite)

■ S-video

bConnect the video cable from the set-top-box or digital cable receiver back panel Video Output connector.

cConnect the video cable into the HP Digital Entertainment Center back panel TV Source 1 In connector.

3Connect stereo audio cables (skip this step if using coaxial [RF]):

a From the set-top-box or digital cable receiver back panel Audio Out right (red) and Audio Out left (white) connectors.

b Into the HP Digital Entertainment Center back panel TV Source 1 In Audio right (red) and Audio left (white) connectors.

4Connect the set-top-box Infrared Transmitter cable (required for signal). See “Infrared Transmitter Connection” on page 88.

80HP Digital Entertainment Center