HTC HD user manual To connect to a Wi-Fi network

Internet 147

To connect to a Wi-Fi network

After Wi-Fi is turned on, your device scans for available Wi-Fi networks in your area.

1.The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired Wi-Fi network, then tap OK.

Note When you select an open (unsecured) network, you will be automatically connected to the network after tapping OK. You do not need to do steps 2 and 3.

2.On the next pop-up message window, do one of the following:

•Tap The Internet if the wireless network connects your device to the Internet.

•Tap Work if the wireless network connects your device to a private network.

3.Enter the key and then tap Connect.

Next time you use your device to detect Wi-Fi networks, you will not see the pop-up message windows again, and you will not be prompted to enter the network key of the previously accessed Wi-Fi network (unless you perform a hard reset which will erase custom settings on your device).

Note Wi-Fi networks are self-discoverable, which means no additional steps are required for your device to connect to a Wi-Fi network. It may be necessary to provide a username and password for certain closed wireless networks.