HTC HD Switch to Sleep mode when not in use, To automatically configure data connection settings

Getting Started  33

To automatically configure data connection settings

1.When you see the notification message from the Connection Setup, tap Yes.

Note If you do not see the notification message, tap

on the Title bar to display the message.

2.If your SIM card supports multiple network operator profiles, a message will appear with network profile choices. Select the profile you want to use and tap OK.

3.Connection Setup then starts to configure your device’s data connection settings.

4.After the Connection Setup completes the configuration, tap Restart.

For more information about Connection Setup, see Chapter 13.

Switch to Sleep mode when not in use

Briefly press the POWER button to turn off the display temporarily and switch your device to Sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power.

Your device automatically goes into Sleep mode when you leave the device idle after a certain period of time. You will still be able to receive messages and calls while your device is in Sleep mode. Pressing the POWER button again or incoming calls will wake up your device.