HTC HTC EVO 4G, PC36100 manual Camera Settings, Changing Basic Settings, Changing Advanced Settings

Camera Settings

Open the menu panel to change basic camera settings and access more camera settings. You can also switch between photo and video modes from the menu panel.

Changing Basic Settings

1.On the viewfinder screen, tap to open the menu panel.

2.To change basic camera settings, tap one of these icons in the menu panel:

Exposure

There’s a brightness bar that allows you to adjust the brightness level. Slide your finger up or down the brightness bar to increase or decrease brightness.

Image properties

Slide your finger across each of the slider bars to adjust the contrast, saturation, and sharpness.

Effect

You can apply a special effect to photos and videos that you will capture. Scroll through the Effect menu and choose from effects such as adding a sepia tone, solarization, and posterizing.

Changing Advanced Settings

1.On the viewfinder screen, tap to open the menu panel.

2.Tap in the menu panel to display the Settings menu and access more camera settings. You can change the following settings from the Settings menu:

Switch camera: Lets you switch between the main camera and the second (front) camera.

White balance: Lets you change the white balance to enable the camera to capture colors more accurately

by adjusting to your current lighting environment. White balance settings include: Auto, Incandescent, Fluorescent, Daylight, and Cloudy.

ISO (photo mode only): Lets you choose an ISO level or set it back to Auto. Higher ISO numbers are better for taking pictures in low light conditions. This option is not available when you are using the second (front) camera.

Resolution: Lets you select a photo or video resolution to use for capturing.

Widescreen (photo mode only): Lets you change the ratio between the width and height of your pictures. When this check box is selected (default), photo resolutions available for selection are in a 3:2 ratio and you can use the entire viewfinder screen to frame your subject. When not selected, photo resolutions available for selection are in a standard 4:3 ratio. This option is not available when you are using the second (front) camera.

Storage: Lets you select where to save captured photos or videos. You can select the storage card or internal memory, if available.

Quality (photo mode only): Lets you select the quality level to use for capturing photos.

Camera and Multimedia

2H. Camera and Multimedia 79