Nortel Networks S560 ISound Settings, KAuto Off, 125, Adjust the following sound settings

Basic Camera Setup: The Setup Menu

iSound Settings

Adjust the following sound settings.

Button sound

Turn button sound On or Off.

When On (default setting) is selected, a beep will sound once when operations are completed successfully, two times when focus has been locked, and three times when an error is detected, and welcome sound.

Shutter sound

Choose shutter sound from On (default setting) or Off.

kAuto Off

When the camera is on and a period of time passes without any operations been done, the camera will enter standby mode (A 15) to save power. Once in standby mode, the power lamp will blink, and if no operations are performed for another three minutes the camera turns off. The time taken to enter standby mode can be set to 30 s, 1 m (default setting), 5 m, or 30 m.

CNotes on Auto Off

The time allowed to elapse before the camera enters standby mode is fixed in the following cases:

•While menus are displayed: 3 minutes

•While slide show is in progress: Up to 30 minutes

•While the AC adapter is connected: 30 minutes

Shooting, Playback and Setup Menus

125