Nortel Networks S560 user manual GVibration reduction, 123, Compensating Movies with Electronic VR

Basic Camera Setup: The Setup Menu

gVibration reduction

Specify the vibration reduction setting for shooting pictures. Vibration reduction effectively corrects blur that commonly occurs when shooting with zooming or at slow shutter speeds.

Turn vibration reduction off when using a tripod to stabilize the camera during shooting.

On (default setting)

Specify the vibration reduction setting for shooting pictures. The camera detects and factors out panning movements automatically when reducing camera shaking. When the camera is panned horizontally, for example, vibration reduction affects only vertical shaking. If the camera is panned vertically, vibration reduction affects only horizontal shaking.

Off

Electronic vibration reduction is not enabled.

When vibration reduction is enabled, the current setting is displayed on the monitor during shooting (When off is selected, an icon for the current setting is not displayed on the monitor.) (A 6).

BNotes on Vibration reduction

•Vibration reduction may take a few seconds to activate after the power is turned on, or the camera enters shooting mode from playback mode. Wait until the display stabilizes before shooting.

•Due to characteristics of the vibration reduction function, images displayed on the camera’s monitor immediately after shooting may appear blurry.

•Vibration reduction may be unable to completely eliminate the effects of camera shaking in some situations.

•“VR” stands for vibration reduction.

DCompensating Movies with Electronic VR

To reduce the effects of camera shake when recording movies other than time-lapse movies, enable Electronic VR (A 71) from the movie menu (A 70).

Shooting, Playback and Setup Menus

123