![](/images/new-backgrounds/1166581/16658131x1.webp)
![](/images/new-backgrounds/1166581/16658131xi2.webp)
Dial-up Settings
Select the band to search the network in the Band list box.
Click Apply.
Configuring the Mode for Searching Network
Click .
Select the mode for searching the network.
•Auto: The device automatically searches the network and registers with it.
•Manual: You need to manually search the network and register with it.
Click Apply.
In Manual mode, select the searched network and click Log on.
Dial-up Settings
Click
to access the Dial-up Settings page.
Configuring the PPP Settings
1Click to access the PPP Settings page.
2Enter the correct parameters.
•Profile List: Select a profile from the established
•PPP Connection: Select the
•PPP Authentication: The service is provided by your ISP. For details, consult your ISP.
•PPP Max Idle Time: The duration of the PPP connection is in idle. In On Demand mode, if no data is transmitted in this duration, the PPP connection automatically disconnects.
•PPP MTU: It is the maximum transmission unit (MTU) of the PPP connection. It is used to set the maximum number of bytes encapsulated in a single data frame.
12