User Manual
Aolynk DR814Q ADSL2+ Broadband Router 2 Installation
er well on the wall when wall-mounting it.
nication failure.
z ble indoors. Outdoor cabling is prohibited, to prevent the signal
sed by overvoltage and overcurrent from
z Keep the cabinet or desk stable enough to hold the DR814Q. Fix the DR814Q and
power adapt
z Reserve more than 10 cm (4 in.) of clearance around the DR814Q chassis for heat
dissipation.
z Keep the operation environment clean. Dust buildup on the chassis may result in
static absorption, reducing the life span and causing commu
z Use an earthing system or lightning protection grounding different from that for the
power supply equipment and keep them as far as possible.
Wire the port ca
port from damages that may be cau
lightning strike.
2.3 Device Connection Telephone
PC
Telephone jack
DR814Q
Splitter
Line
ADSL Phone
LAN USB ADSL
14Q
I.
To c
z end of the telephone cable to the ADSL port (similar to a common
z and the
nect the splitter to the telephone jack on the
telephone when you access the network.
II.
To connect the DR814Q to a PC or Ethernet, two options are available:
Figure 2-1 Connect the DR8
Connect to an ADSL line
onnect the DR814Q to an ADSL line, two options are available:
Connect one
telephone port) on the DR814Q rear panel, and the other end to the telephone jack
on the wall.
As shown in Figure 2-1, connect both the ADSL port on the DR814Q
telephone to a splitter, and then con
wall. It allows you to use the
Connect to a PC or Ethernet
6