Huawei DR814Q - page 44

User Manual
Aolynk DR814Q ADSL2+ Broadband Router 5 Advanced Configuration
39
your ISP. Similarly, connect PCs to ports LAN2 and LAN3 and access the Internet
by PPPoE connection. After you enter the username and password, the PC can
obtain an IP address quickly and set up a connection with the website.
4) Access the Internet on a PC through the management port (LAN4). Click [Quick
Setup] in the navigation bar and select the PPPoE option on the [Quick Setup]
page. Set the values of VPI and VCI to 8 and 35 respectively, type userName,
myPassword, and myPassword in the PPPoE Username, PPPoE Password,
and PPPoE Password (confirm) text boxes respectively and then click <Apply> to
save your settings.
Figure 5-3 Set the PPPoE authentication information
5) It takes about two minutes for your settings to take effect. Figure 5-4 depicts these
settings. Actual configuration on the WAN connections page Click [Status] in the
navigation bar to bring up the [Status] page as shown in Figure 4-25. You can find
that the WAN IP Address item is a public IP address instead of the original one
0.0.0.0. Then you can access the Internet through a PC connected to the LAN4
port.