User Manual
Aolynk DR814Q ADSL2+ Broadband Router 5 Advanced Configuration
51
Figure 5-16 Dynamic route settings
Table 5-7 Description of dynamic route setting items
Item Description
IP Interface Select the interface to be configured with RIP.
RIP Send
Select the protocol version (RIP1/RIP2) used to send RIP route
information. “None” indicates not to send route information. It is
recommended to set this parameter the same as the neighboring
router.
RIP Accept
Select the protocol version used to receive RIP route information.
“Both” indicates to receive both RIP1 and RIP2 route information,
and “None” indicates not to receive route information. It is
recommended to set this parameter the same as the neighboring
router.
Send
Multicast If RIP2 is selected to send RIP route information, this parameter is
required to specify whether to send (true/false) multicast packets.
5.4 Service
Click [Service] in the navigation bar to enter the corresponding page, where you can
configure the DR814Q as an SNTP (simple network time protocol) client, SNMP
(simple network management protocol) proxy or IGMP (Internet group management
protocol) proxy.

5.4.1 SNTP

Configure the DR814Q as an SNTP client and thus you can obtain accurate time/date
information from the corresponding SNTP server.