Huawei DR814Q - page 23

User Manual

Aolynk DR814Q ADSL2+ Broadband Router 4 Web-based Basic Configuration

18

Table 4-1 Description of DHCP/Static IP items

Item Description

Name Type in the distinctive description on this service.

Default route Specify (true/false) whether to generate a default route for

this service.

VPI Type in the VPI value provided by your ISP.

VCI Type in the VCI value provided by your ISP.

Encapsulation

method

Select the packet encapsulation method, LlcBridged or

VcMuxBridged, from the drop-down list according to your

ISP. LlcBridged is usually selected.

Obtain an IP Address

Automatically Select this option to obtain an IP address from your ISP’s

DHCP server automatically.

Use the following IP

Address

Select this option if you have the static IP address provided

by your ISP. You need also provide the IP address, subnet

mask and gateway address.

WAN IP Address Type in the static IP address provided by your ISP.

Subnet Mask Type in the subnet mask provided by your ISP.

Gateway Type in the IP address of the next-hop gateway device.

2) IPoA

IPoA allows IP packets directly over the ADSL physical link at high transmission rate.

Figure 4-6 IPoA

Contents

Main HUAWEI Page Page Table of Contents Page 1 1.1 Intro duction 1.2 App 1.2.1 Front Panel earance 1.2.2 Rear Panel 1.3 Fea r tu es Page 2 2.1 Pac king List 2.2 Prec autions 2.3 Device Connection I. II. Connect to an ADSL line Connect to a PC or Ethernet III. Connect to the power adapter 3 3.1 Prer I. stem requirement II. III. 3.2 Log in 3.3 Web Page Layout Page 3.4 Description of the Factory Default Settings Page 4 4.1 Qui ck Setup I. PPPoE II. DHCP 4.2 WAN Setup 4.2.1 WAN I. WAN service list II. Create a new service Page Page 4.2.2 DNS Relay 4.2.3 DDNS 4.2.4 Scan PVC 4.3 LAN Setup 4.3.1 LAN I. Set a LAN port II. Create a virtual interface 4.3.2 DHCP Server I. DHCP status II. DHCP server III. DHCP relay 4.3.3 DHCP client 4.4 Device 4.4.1 Restarting/Restoring Factory Default Settings 4.4.2 Password 4.4.3 Remote Access 4.4.4 Backing Up/Restoring Configuration I. Back up the current configuration II. Use the file to restore the configuration Page 4.4.5 Upgrade 4.5 Status 4.5.1 Status 4.5.2 Data Transmission Channels 4.5.3 Port Status 4.5.4 Log 4.6 Saving the Configuration 5 5.1 Atta I. ching LAN Ports to PVCs PVC attachment settings Page Page Page II. QoS configuration Page 5.2 Security 5.2.1 Virtual Server I. Set the interface II. Set the virtual server III. Set the DMZ host 5.2.2 Firewall I. Enable/disable the firewall II. Set the firewall level III. Configure port filtering policies 5.2.3 Trigger 5.2.4 NAT I. Configure NAT II. Configure static NAT 5.2.5 IDS 5.3 Route Configuration 5.3.1 Static Route Configuration Page 5.3.2 Dynamic Route Configuration 5.4 Service 5.4.1 SNTP 5.4.2 SNMP Page 5.4.3 IGMP Proxy 6 6.1 DR8 14Q Troubleshooting Page 6.2 Diagnosis Tools 6.2.1 Ping 6.2.2 Nslookup Page 7 7.1 Inst alling TCP/IP Page 7.2 Configuring TCP/IP 7.2.1 Specifying to Obtain an IP Address Automatically Page 7.2.2 Specifying a Static IP Address Page 8 8.1 Inst I. II. alling USB Driver Insert the driver CD into the CD-ROM of your PC. Page 8.2 Configuring IP Properties Page 9 Subnet Mask 9.1 IP Address s and 9.1.1 Stru 9.1.2 Classes of IP Addresses 9.2 Subnet Mask 10 Specifications ix Technical 11