User Manual
Aolynk DR814Q ADSL2+ Broadband Router 7 Appendix – TCP/IP Protocol
65
the LAN. But in some cases you still need to configure network settings for some or
even all the PCs on a network.
By default, the IP address of the Ethernet port of DR814Q is 192.168.1.1, and the
subnet mask is 255.255.255.0. Generally, you can choose any from 192.168.1.2 to
192.168.1.254 to make your PC in the same segment with 192.168.1.1/24. Follow the
procedure suitable for your operating system to specify IP addresses.
1) Specify the IP address of your PC.
z Windows 98/ME/NT: In the [TCP/IP Properties] dialog box (see Figure 7-4), click
the [IP Address] tab and select the Specify an IP address option.
z Windows 2000/XP: In the [Internet Protocol (TCP/IP) Properties] dialog box (see
Figure 7-7) select the [General] tab, and then the Use the following IP address
option. Type in the IP address and subnet mask in the corresponding fields and
click <OK>.
2) Specify the IP address of the gateway.
z Windows 98/ME/NT: In the [TCP/IP Properties] dialog box (see Figure 7-4) select
the [Gateway] tab. Type in the default IP address of your DR814Q (192.168.1.1) in
the [New gateway] text box and click <Add>.
z Windows 2000/XP: In the [Internet Protocol (TCP/IP) Properties] dialog box (see
Figure 7-7), select the [General] tab. Type in the default IP address of your
DR814Q (192.168.1.1) in the [Default gateway] text box and click <OK>.
3) Specify the IP address of the DNS server.
z Windows 98/ME/NT: In the [TCP/IP Properties] dialog box (see Figure 7-4), click
the [DNS configuration] tab and type in the default IP address of your DR814Q
(192.168.1.1) as the DNS server IP address in the corresponding field.
z Windows 2000/XP: In the [Internet Protocol (TCP/IP) Properties] dialog box (see
Figure 7-7) click <Advanced…> to open the [Advanced TCP/IP Configuration]
dialog box. Click the [DNS] tab and click <Add…>. Type in the default IP address
of the DR814Q (192.168.1.1) in the [DNS server] field and click <Add>.
4) Making the settings take effect.
z Windows 98/ME/NT: Click <OK> and restart your PC for the above settings to take
effect.
z Windows 2000/XP: Click <OK> to make the above settings to take effect.