Hughes AN4-074-DF installation manual Antenna installation safety, Danger

Models: AN4-074-DF

1 72
Download 72 pages 51.64 Kb
Page 4
Image 4
Antenna installation safety

Product warning labels The following safety alert label is affixed to each side of the satellite antenna feed arm:

Manual backgroundCAUTION

Manual background This device emits radio frequency energy

Manual background Keep two feet (0.6 meters) away from this point Manual background Before servicing or upgrading, unplug indoor power connection

T0145005

Antenna installation safety

This label advises that the antenna emits radio frequency (RF) energy. Because of this potential safety hazard, observe all cautions in the following section (Antenna installation safety) concerning RF radiation.

Observe the following precautions when installing the satellite antenna. This manual also includes additional safety alerts where appropriate concerning specific installation

procedures.

Manual background WARNING

Only HNS-certified installers may install or service DIRECWAY earth stations and components. All HNS-certified installers must expressly acknowledge the HNS requirements for DIRECWAY installations.

Manual background DANGER

If you work on a roof, tower, or other high structure or use a ladder or scaffold to access the work site, follow these precautions to prevent personal injury or death:

Walk only on sound roof structures.

Make sure the antenna assembly and installation surface are structurally sound so they can support all loads (equipment weight, ice, and wind).

Use appropriate safety equipment (for example, a lifeline), depending on the work location.

Follow all safety precautions from the manufacturers of all safety equipment and other equipment used.

Perform as many procedures as possible on the ground.

iv

Important safety information 1035567-0001 Revision A

Page 4
Image 4
Hughes AN4-074-DF installation manual Antenna installation safety, Danger