** | ** |
** |
|
| ** |
2.Set the LNB Frequency value
Press the OK 
or 
button to display LNB Frequency List.
Select LNB Frequency using the 
button, and press the
OK 
button.
If you cannot find the LNB Frequency value from the list, select User Define, manually enter the frequency using the
NUMERICAL (0~9) button, and then press the OK 
button.
Note: When using Universal LNB, select Universal for LNB Frequency which is 9750/10600 (MHz). Also, if you select Universal, 22KHz tone value is disabled.
3.Set up 22kHz Tone.
Select 22kHz Tone using the 
button, and press the OK
or 
button to change the setting. When using 22kHz tone switch, select Enable. Otherwise, select Disable.
4.Select DiSEqC switch.
Select DiSEqC item using the 
button, and press the OK
or 
button to display DiSEqC Switch List.
Select DiSEqC Switch using the 
button and then press the
OK 
button.
5.When you complete the setting, select Next using the 
button and press the OK 
button to start Automatic Search.
Note:
•If the antenna is correctly set up, the level at signal strength bar and quality bar, which are located at the bottom of the screen, are generally moved up.
•If you encounter any problems or questions when setting up the antenna, please contact your local product installer or distributor.
**
**
**
**
**
GB 15
**
**
**
**
**
