Humax F2-FOX warranty Select Go to Stored Position using, Select Store Current Position using

**			**
**
8. Installation
6. Confirm Signal Strength and Quality Level and fine-tune the
Antenna direction.
•	Select Go to Stored Position using the			button.
•	Move the Antenna to East/West by pressing			/	button.
	Adjust Signal Level to maximum.
7. Save the adjusted position of Satellite.
•	Select Store Current Position using the				button.
•	Press the OK	button to save the Antenna position
	headed for the selected Satellite.
8. You can set antenna position by satellite by repeating the above
procedure.
9. You can recalculate positions for all other satellite based on one
satellite. Adjust position of antenna by satellite based on one set
position without setting each position of antenna by satellite.
•	Select Recalculation using the		button.
•	Press the OK	button.
• To adjust all positions again, select Yes and press the OK
	button.

Note: If you select Recalculation with selecting Reference for Satellite option, the antenna is reset to default.

**

**

**

**

**

GB 60

**

**

**

**

**