**
**
**
8. Installation
Edit TP List
You can edit TP list to search at a time and change the setting for Transponder.
1.Select Edit TP List from Multiple Manual Search, and press the
OK 
or 
button.
2.Select Add and press the OK 
button to add a new Transponder data.
3.Select a specific TP from the Transponder list, press the OK
button, select Edit, and then press the OK 
button to edit Transponder data.
4.Select a specific TP from the Transponder list, press the OK
button, select Delete , and then press the OK 
button to delete Transponder data. You can select multiple TPs to delete.
5.When completing configuring Transponder list, press the BACK
button to return to parent menu. Select Yes and press the
OK 
button to confirm to save before moving.
Note: When you select Default List and press OK , Transponder list display.
**
**
8.5 Motor Antenna
If you use Motor Antenna, which is operated by motor, you should set the antenna as Motor before Channel Search.
1.Press the MENU 
button.
2.Select Installation using the 
button, and press the OK
or 
button.
3.Select Antenna Setting using the 
button, and press the
OK 
or 
button.
4.Press the OPT+ 
button on the Antenna Setting screen to switch into Motor Antenna Menu.
**
**
**
GB 56
**
**
**
**
**
