**

**

 

 

**

**

DiSEqC Input

You can select DiSEqC switch.

1.Select DiSEqC Input using the button, and press the OK

or button.

Select the DiSEqC Swtich using the button, and press the

OK button.

You can select one option among Tone burst A~B, DiSEqC A~D, DiSEqC A~D for 2.0 and Disable.

LNB Voltage

You can raise the LNB Voltage value (select High ) preparing for the distance between antenna and receiver is further than 60m.

Caution: If your set the LNB Voltage value as High when the distance between antenna and receiver is close, the LNB may be damaged. Please be careful.

1.Select LNB Voltage using the button, and press the OK

or button.

2.Set the LNB Voltage value using the button, and press

the OK button.

Standard If the distance between antenna and receiver is within 60m

High

If the distance between antenna and receiver is

 

further than 60m

3.If you change the setting value to High a message will prompt

you to confirm. Select Yes and press the OK button. When the value is set to High , 1V higher than LNB voltage is supplied to LNB.

**

**

**

**

**

GB 47

**

**

**

**

**

Page 47
Image 47
Humax F2-FOX warranty DiSEqC Input, LNB Voltage, High