** | ** |
** |
|
| 8. Installation |
Satellite Alternative
You can search and watch a programme by using the antenna headed for the selected satellite.
1.Select Satellite Alternative using the 
button, and press
the OK 
or 
button.
2.Then, you can change into one of the following options. Disable Does not search the selected satellite. Enable Searches the selected satellite.
Note: If there is no satellite that Satellite Alternative is set to Enable,
Channel Search is not available.
LNB Frequency (MHz)
You can enter LNB Frequency.
1.Select LNB Frequency using the 
button, and press the
OK 
or 
button.
2.Select one value from Universal ,9750,10600, 5150, 11475,
User Define using the 
button. If you have selected User Define, enter LNB Frequency value directly, and press the OK 
button
Note: If you have selected Universal, select 9750/10600. In this case, the 22KHz tone value is disabled.
22kHz Tone
You can select whether or not to use 22KHz Tone.
1.Select 22kHz Tone using the 
button, and press the OK
or 
button.
2.Select whether or not to use 22KHz Tone using the 
button,
and press the OK 
button.
Enable Selects Enable if Dual LNB is used or 2 antennas are connected to the 22kHz tone switch box.
Disable Selects Disable if 22kHz Tone is not used.
**
**
**
**
**
GB 46
**
**
**
**
**
