Triplog Reset, Restore Defaults, To Reset Triplog | Humminbird 161

Triplog Reset

Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, or if the GPS Receiver is connected. The Triplog

provides the following information: timer for elapsed time, distance traveled since last reset, and average speed.

NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog

information on the screen.

To Reset Triplog:

1.Highlight Reset Triplog on the Setup menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.

3.The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor key once more. To cancel Reset Triplog, press the LEFT Cursor key.

Restore Defaults

Restore Defaults resets ALL menu settings to their factory defaults. Use this menu choice with caution!

To Restore Defaults:

1.Highlight Restore Defaults on the Setup menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.

3.The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor key once more. To cancel Restore Defaults, press the LEFT Cursor key.

75

Image 82

Humminbird 161 manual Triplog Reset, To Reset Triplog, To Restore Defaults

Contents

GPS Chartplotter Operations Manual Thank You Table of Contents Key Functions Iii Sonar Menu Tab Chart Menu Tab Specifications Glossary Contact Humminbird 103 How Sonar Works Peak to Peak measures power output at the highest points Single Beam Sonar How GPS and Cartography WorkPage What’s On the Display Bait Ball Hard Bottom Rocky Bottom Structure where fish may be hiding Adjacent to your boat, including the following items Sonar views Zoom View Chart View Big Digits ViewViews Sonar View Sonar View Understanding Sonar History Real Time Sonar RTS Window Freeze Frame Bottom PresentationPage Sonar Zoom View Sonar Zoom View Big Digits View Circular Flasher View Bird’s Eye View Bird’s Eye View Chart View Chart View without Active Cursor Combo View View Orientation Chart View with Cursor Present Viewing Cartography Introduction to Navigation Waypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Navigation X-PressTMmenu Add a Waypoint Target or Trolling Grid Save, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved Tracks View Key POWER/LIGHT KeyKey Functions Info Key Menu Key WAY Cursor Control Key Zoom +/- Key Mark KeyGoto Key Exit Key Powering Up the Unit Menu System Sonar Tab Normal Mode Advanced Mode Normal Operation Start-Up Options MenuNormal Simulator System Status Simulator System Status Accessory Test Self Test GPS Diagnostic View GPS Diagnostic View Sonar X-PressTMMenu Sonar views only Sensitivity To adjust the SensitivityHighlight Sensitivity on the Sonar X-PressTMmenu To adjust the Upper Range Upper Range Lower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Bottom View Chart SpeedTo adjust the Chart Speed Bottom View Bottom Lock To adjust the Bottom RangeBottom Range To turn on Bottom Lock Highlight Cancel Navigation on the Sonar X-PressTMmenu Cancel NavigationTo Cancel Navigation Only when Navigating Navigation X-PressTMMenu Navigation views only Highlight WaypointName on the Navigation X-PressTMmenu Waypoint NameTo view the Waypoint Name Submenu Waypoint Submenu contains the following menu choices Save Current Track Chart or Combo view onlyCursor to Waypoint To move cursor to a saved waypoint Save Current Route Clear Current TrackSkip Next Waypoint To Remove a Target Highlight Cancel Navigation on the Navigation X-PressTMmenuRemove Target Only if a Target is Active To Remove a Grid Remove GridSonar Window To Set the Size of the Sonar Window in the Combo View Most recently-created waypoint Sonar Menu Tab Press the Menu key twice to access the Main MenuSonar tab Fish ID+TM To turn Fish ID+ on or off Fish ID Sensitivity To change the Fish ID Sensitivity settingTo change the RTS Window setting Highlight Fish ID Sensitivity on the Sonar main menu Zoom Width To change the Zoom Width SettingTo change the Depth Lines setting Depth Lines To change the Surface Clutter setting Surface Clutter Noise Filter To change the Noise Filter settingTo change the Max Depth setting Max Depth To change the Water Type setting Water Type Navigation Menu Tab Navigation tab To view the Current Track Submenu Current TrackCurrent Track allows you to view the Current Track submenu Highlight Current Track on the Navigation main menu To view the Saved Tracks Submenu Saved TracksSaved Tracks allows you to view the Saved Tracks submenu Highlight Saved Tracks on the Navigation main menu Highlight Waypoints on the Navigation main menu WaypointsTo view the Waypoints Submenu Waypoints Submenu contains the following menu choices Highlight Routes on the Navigation main menu RoutesTo view the Routes Submenu Routes Submenu contains the following menu choices North Reference Chart OrientationGrid Rotation Trackpoint Interval To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Track Min Distance Course Projection Line Map DatumDelete All Nav Data Chart Menu Tab To change the Chart Detail Level setting Chart Detail LevelHighlight Chart Detail Level on the Chart main menu Map Borders To change the Map Borders settingTo change the Lat/Lon Grid setting Lat/Lon Grid Set Simulation Position To set the Simulation Position Clear Map Offset To change the Map Offset settingSet Map Offset To Clear Map Offset Alarms Menu Tab To change the Depth Alarm setting Depth AlarmFish ID Alarm To change the Fish ID Alarm setting To change the Low Battery Alarm setting Low Battery AlarmTemp Alarm To change the Temp Alarm setting To change the Off Course Alarm setting Off Course AlarmArrival Alarm To change the Arrival Alarm setting To change the Drift Alarm setting Drift AlarmAlarm Tone To change the Alarm Tone setting Setup Menu Tab Units Temp Units DepthUnits Distance Units Speed User ModeLanguage To Reset Triplog Triplog ResetRestore Defaults To Restore Defaults Select Readouts Advanced, Sonar view only Depth Offset To change the Depth Offset settingTo Select Readouts Temp Offset To change the Temp Offset settingTo change the Speed Calibration setting Speed Calibration Daylight Saving Time To change the Daylight Saving Time settingLocal Time Zone To change the Local Time Zone Time Format To change the Position Format settingPosition Format To change the Time Format Nmea Output Date FormatTo change the Date Format To turn Nmea Output on or off SonarTo turn Sonar on or off To Change the View Status of Any View Views Menu TabCombo View Highlight the View main menu tab Troubleshooting SeriesTM Defaults to Simulator with a Transducer Attached Problem Possible Cause Display ProblemsOr faulty Boat’s engine Finding the Cause of NoiseIsolation Cavitation from Specifications Glossary Sonar TermsPage Page Page Page Receiver See Transmitter Page Page Page GPS & Navigation Terms Page Page 100 101 102 103 104 Contact Humminbird 105