Remove Grid, Sonar Window, To Remove a Grid

Remove Grid

(only if a Grid is Active)

Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid has already been applied to a waypoint.

NOTE: See Add a Waypoint Target or Trolling Grid for more information.

To Remove a Grid:

1.Highlight Remove Grid on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to remove the grid.

Sonar Window

(Combo view only)

Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only be accessed from the Combo View.

To Set the Size of the Sonar Window in the Combo View:

1.Highlight Sonar Window on the Navigation X-PressTMmenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar window. (Wide, Medium, Narrow, Default = Medium)

Page 52

Image 52

Humminbird 161 manual Remove Grid, To Remove a Grid, To Set the Size of the Sonar Window in the Combo View

Contents

GPS Chartplotter Operations Manual Thank You Table of Contents Key Functions Iii Sonar Menu Tab Chart Menu Tab Specifications Glossary Contact Humminbird 103 How Sonar Works Peak to Peak measures power output at the highest points Single Beam Sonar How GPS and Cartography WorkPage What’s On the Display Bait Ball Hard Bottom Rocky Bottom Structure where fish may be hiding Adjacent to your boat, including the following items Zoom View Chart View Big Digits View ViewsSonar views Sonar View Sonar View Understanding Sonar History Real Time Sonar RTS Window Freeze Frame Bottom PresentationPage Sonar Zoom View Sonar Zoom View Big Digits View Circular Flasher View Bird’s Eye View Bird’s Eye View Chart View Chart View without Active Cursor Combo View View Orientation Chart View with Cursor Present Viewing Cartography Introduction to Navigation Waypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Navigation X-PressTMmenu Add a Waypoint Target or Trolling Grid Save, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved Tracks POWER/LIGHT Key Key FunctionsView Key Info Key Menu Key WAY Cursor Control Key Mark Key Goto KeyZoom +/- Key Exit Key Powering Up the Unit Menu System Sonar Tab Normal Mode Advanced Mode Normal Operation Start-Up Options MenuNormal Simulator System Status Simulator System Status Accessory Test Self Test GPS Diagnostic View GPS Diagnostic View Sonar X-PressTMMenu Sonar views only Sensitivity To adjust the SensitivityHighlight Sensitivity on the Sonar X-PressTMmenu To adjust the Upper Range Upper Range Lower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu Chart Speed To adjust the Chart SpeedTo adjust the Bottom View Bottom View To adjust the Bottom Range Bottom RangeBottom Lock To turn on Bottom Lock Cancel Navigation To Cancel NavigationHighlight Cancel Navigation on the Sonar X-PressTMmenu Only when Navigating Navigation X-PressTMMenu Navigation views only Waypoint Name To view the Waypoint Name SubmenuHighlight WaypointName on the Navigation X-PressTMmenu Waypoint Submenu contains the following menu choices Chart or Combo view only Cursor to WaypointSave Current Track To move cursor to a saved waypoint Save Current Route Clear Current TrackSkip Next Waypoint Highlight Cancel Navigation on the Navigation X-PressTMmenu Remove TargetTo Remove a Target Only if a Target is Active Remove Grid Sonar WindowTo Remove a Grid To Set the Size of the Sonar Window in the Combo View Most recently-created waypoint Sonar Menu Tab Press the Menu key twice to access the Main MenuSonar tab Fish ID+TM To turn Fish ID+ on or off To change the Fish ID Sensitivity setting To change the RTS Window settingFish ID Sensitivity Highlight Fish ID Sensitivity on the Sonar main menu To change the Zoom Width Setting To change the Depth Lines settingZoom Width Depth Lines To change the Surface Clutter setting Surface Clutter To change the Noise Filter setting To change the Max Depth settingNoise Filter Max Depth To change the Water Type setting Water Type Navigation Menu Tab Navigation tab Current Track Current Track allows you to view the Current Track submenuTo view the Current Track Submenu Highlight Current Track on the Navigation main menu Saved Tracks Saved Tracks allows you to view the Saved Tracks submenuTo view the Saved Tracks Submenu Highlight Saved Tracks on the Navigation main menu Waypoints To view the Waypoints SubmenuHighlight Waypoints on the Navigation main menu Waypoints Submenu contains the following menu choices Routes To view the Routes SubmenuHighlight Routes on the Navigation main menu Routes Submenu contains the following menu choices North Reference Chart OrientationGrid Rotation To change the Trackpoint Interval setting To change the Track Minimum Distance settingTrackpoint Interval Track Min Distance Course Projection Line Map DatumDelete All Nav Data Chart Menu Tab To change the Chart Detail Level setting Chart Detail LevelHighlight Chart Detail Level on the Chart main menu To change the Map Borders setting To change the Lat/Lon Grid settingMap Borders Lat/Lon Grid Set Simulation Position To set the Simulation Position To change the Map Offset setting Set Map OffsetClear Map Offset To Clear Map Offset Alarms Menu Tab Depth Alarm Fish ID AlarmTo change the Depth Alarm setting To change the Fish ID Alarm setting Low Battery Alarm Temp AlarmTo change the Low Battery Alarm setting To change the Temp Alarm setting Off Course Alarm Arrival AlarmTo change the Off Course Alarm setting To change the Arrival Alarm setting Drift Alarm Alarm ToneTo change the Drift Alarm setting To change the Alarm Tone setting Setup Menu Tab Units Temp Units DepthUnits Distance Units Speed User ModeLanguage Triplog Reset Restore DefaultsTo Reset Triplog To Restore Defaults Select Readouts Advanced, Sonar view only Depth Offset To change the Depth Offset settingTo Select Readouts To change the Temp Offset setting To change the Speed Calibration settingTemp Offset Speed Calibration To change the Daylight Saving Time setting Local Time ZoneDaylight Saving Time To change the Local Time Zone To change the Position Format setting Position FormatTime Format To change the Time Format Nmea Output Date FormatTo change the Date Format To turn Nmea Output on or off SonarTo turn Sonar on or off Views Menu Tab Combo ViewTo Change the View Status of Any View Highlight the View main menu tab Troubleshooting SeriesTM Defaults to Simulator with a Transducer Attached Problem Possible Cause Display ProblemsOr faulty Finding the Cause of Noise IsolationBoat’s engine Cavitation from Specifications Glossary Sonar TermsPage Page Page Page Receiver See Transmitter Page Page Page GPS & Navigation Terms Page Page 100 101 102 103 104 Contact Humminbird 105

Humminbird 161 manual Remove Grid, Sonar Window, To Remove a Grid

Models: 161

Remove Grid

(only if a Grid is Active)

To Remove a Grid:

Sonar Window

To Set the Size of the Sonar Window in the Combo View:

1.Highlight Sonar Window on the Navigation X-PressTMmenu.