Remove Grid, Sonar Window, Combo View only | Humminbird GR16

Remove Grid

(Only if a Grid is Active)

Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid has already been applied to a waypoint.

To Remove a Grid:

1.Highlight Remove Grid on the Navigation X-Press™ menu.

2.Use the RIGHT 4-WAY Cursor Control key to remove the grid.

Sonar Window

(Combo View only)

Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only be accessed from the Combo View.

To Set the Size of the Sonar Window in the Combo View:

1.Highlight Sonar Window on the Navigation X-Press™ menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar window. (Wide, Medium, Narrow, Default = Medium)

Waypoint [Name]

(Most recently-created waypoint)

Waypoint [Name] allows you to view the waypoints submenu for the most recently created waypoint.

NOTE: You must have selected MARK from the X-Press™ menu at least once since you last powered up for this menu choice to appear.

To view the Waypoint [Name] Submenu:

1.Move the cursor to the desired position and select Mark from the X-Press™ menu to save a waypoint.

2.Highlight Waypoint[Name] on the Navigation X-Press™ menu.

3.Use the RIGHT 4-Way Cursor Control key to view the Waypoints submenu.

28

Image 33

Humminbird GR16 manual Remove Grid, Sonar Window, Only if a Grid is Active, Combo View only, Most recently-created waypoint

Contents

GR16 GPS Receiver Accessory Manual Thank You Table of Contents Alarms Menu Tab Troubleshooting How GPS and Trackplotting Work GR16 GPS Connection Kit Connecting a GR16 GPS Receiver to the Fishfinder Nmea Output Access under mounting location GPS Receiver InstallationNo access under mounting location Shown in the illustration Access Under Mounting Location No Access Under Mounting Location Bird’s Eye View ViewsNavigation views Bird’s Eye View Track View Combo View Track View with Active Cursor Track View View Orientation Combo View Waypoints, Routes and Tracks Introduction to Navigation Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Track View with Target Add a Waypoint Target or Trolling Grid Edit, Delete or Hide Saved Tracks Save or Clear a Current Track Menu Menu System Sonar Tab, Normal Mode Sonar Tab, Advanced Mode Start-Up Options Menu Normal OperationSimulator Self Test System Status GPS Diagnostic View Accessory Test PC Connect Exit PC Connect mode by powering the Fishing System off Sonar Views only Sonar X-Press Menu Only when Navigating Cancel NavigationTo Cancel Navigation Mark Navigation Views only Navigation X-Press Menu Go To ZoomTo Zoom To Begin Navigation Only with an active cursor on a waypoint Waypoint NameTo view the Waypoint Name Submenu Highlight WaypointName on the Navigation X-Press menu Cursor to Waypoint Chart or Combo view onlySave Current Track Clear Current Track Remove Target Skip Next WaypointTo Skip Next Waypoint Only if a Target is Active Sonar Window Remove GridOnly if a Grid is Active Combo View only Waypoint Name Submenu Navigation Menu Tab Saved Tracks Current Track To view the Waypoints Submenu WaypointsHighlight Waypoints on the Navigation main menu Waypoints Submenu contains the following menu choices To change the North Reference setting To change the View Orientation settingTo change the Grid Rotation setting North Reference To change the Track Minimum Distance setting To change the Trackpoint Interval settingTrackpoint Interval Track Min Distance Map Datum Course Projection LineDelete All Nav Data Alarms Menu Tab Arrival Alarm Off Course AlarmTo change the Off Course Alarm setting To change the Arrival Alarm setting Drift Alarm To change the Drift Alarm settingHighlight Drift Alarm on the Alarms main menu Setup Menu Tab To change the Units Speed setting To change the Units Distance settingTo Reset Triplog Units Distance Local Time Zone To change the Daylight Saving Time settingDaylight Saving Time To change the Local Time Zone Position Format To change the Position Format settingTime Format Advanced, International only Nmea Output Date FormatTo change the Date Format Following Nmea sentences are output To turn Nmea Output on or off Fishing System Doesn’t Power Up Troubleshooting Problem Possible Cause Display ProblemsHigh speeds Input voltage does not exceed 20 Volts Possible Source of Noise Isolation Other electronic devices Finding the Cause of NoiseBoat’s engine Propeller Humminbird Accessories GPS & Navigation Glossary Page Page Page Page Page Monday Friday 800 a.m. to 430 p.m. Central Standard Time Contact Humminbird