ADVANCED FUNCTIONS OF THE NS 10
This section provides complete information on operating advanced features of the NS 10. You
are encouraged to read this information completely as you first learn to use the NS 10. Doing so
will ensure that you can make the most of its many features and functions.
CREATING PERMANENT WAYPOINTS
Any waypoint may be permanently stored, changed, or deleted, by using the Select System.
This is especially helpful if you plan to return to the same area in the future. The NS 10 memory
will hold up to 150 permanent waypoints, as well as 99 temporary waypoints.
Entering a New Waypoint
Press SELECT to retrieve the MAIN MENU.
Use the up/down arrows to highlight WAYPOINT.
Press ENTER when setting is correct. The WAYPOINT menu will be displayed.
Three options are available to you in the waypoint menu:
ENTER WAYPOINTS- Selecting this menu will allow you to enter permanent waypoints into the
NS 10 memory, which will be explained in this section.
CHANGE/DELETE- Selecting this menu will allow you to change the information with a
permanent waypoint or change a temporary waypoint to a permanent waypoint. The menu also
allows you to delete a waypoint. (refer to “Changing a temporary waypoint to a permanent
waypoint”)
LIST WAYPOINTS- Selecting this menu will allow you to list all temporary and permanent
waypoints. (Refer to “Waypoint Listing”)