Start-Up and Operation
Clean the strainer immediately after the pump has been installed and tested, and again after a few hundred gallons have been delivered. Thereafter, once every six months, or as required. The procedure for cleaning the stainer can be found in the Maintenance and Troubleshooting section.
DAILY OPERATION
1.To begin fueling, remove the nozzle from the boot and turn on the pump handle.
2.If your model has an automatic reset, the register resets to zeros. If your model has a reset button, push it to zero the register.
3.Dispense fuel.
4.Turn the pump handle off. The amount delivered is displayed on the register.
9312 |
