CONTENTS
Operator’s Manual for
Rider 11 and Rider 13 H
Rider 11 Bio and Rider 13 H Bio
Explanation of symbols | 2 | Dismantling of the machine hoods | 18 |
Safety instructions | 3 | Checking the engine’s oil level | 20 |
General use | 3 | Checking the engine’s cooling air intake | 20 |
Driving on slopes | 4 | Checking the fuel pump’s air filter | 20 |
Children | 5 | Checking and adjusting the steering wires .... | 21 |
Maintenance | 5 | Checking and adjusting the brakes | 22 |
Presentation | 7 | Checking the transmission’s oil level | 23 |
Location of the controls | 7 | Checking the battery acid level | 23 |
Throttle/Choke lever | 8 | Checking the safety system | 23 |
Drive disengagement lever | 8 | Replacement of air filter | 24 |
Parking brake | 8 | Checking and adjusting the cutting unit |
|
Throttle pedal | 9 | ground pressure | 25 |
Cutting unit | 10 | Checking the parallelism of the cutting unit ... | 25 |
Lift lever for cutting unit | 10 | Adjusting the parallelism of the cutting unit .... | 26 |
Lever for adjustment of cutting height | 10 | Service position for BioClip 90 | 27 |
Seat | 11 | Checking the blades | 30 |
Fuelling | 11 | Checking the tyre pressure | 30 |
Driving | 12 | Changing the oil | 31 |
Before starting | 12 | Lubrication | 31 |
Starting the engine | 12 | Checking and adjustment of throttle wire | 33 |
Driving the machine | 14 | Replacement of fuel filter | 33 |
Cutting tips | 15 | Trouble shooting schedule | 34 |
Stopping the engine | 16 | Storage | 34 |
Drive disengagement lever | 16 | Winter storage | 34 |
Maintenance | 17 | Service | 34 |
Maintenance schedule | 17 | Technical data | 36 |
IMPORTANT INFORMATION
Read through these instructions carefully so that you know how to use and maintain the machine before using it.
For servicing other than described in this manual contact an authorised dealer for parts and service.
Travel and transport on public roads
Check the relevant road traffic regulations before driving the machine on a public road. If transporting the machine on another vehicle always use approved securing devices and make sure that the machine is securely held.
Towing
If your machine has a hydrostatic transmission you should only tow it very short distances at low speed if absolutely necessary, otherwise the transmission may be damaged.
Intended use
This machine is designed solely for cutting grass on conventional lawns and other cleared and leveled ground without obstacles, as rocks, stumps etc., and, in conjunction with accessories supplied by the manu- facturer even for other special tasks for which instructions are delivered with the accessory. Use in any other way is considered as contrary to the intended use. Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential elements of the intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational medicine, and all road traffic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any result- ing damage or injury
English – 1