Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna 11 Bio/13 H Bio Technical Data, Dimensions, Rider 13 H, Engine, Electrical system

Models: 11 Bio/13 H Bio

1 43

Download 43 pages 52.23 Kb

Page 37

TECHNICAL DATA

TECHNICAL DATA

Dimensions	Rider 11	Rider 13 H
Length	2000 mm	2000 mm
Width	960 mm	960 mm
Height	1060 mm	1060 mm
Unladen weight	225 kg	225 kg
Wheel base	820 mm	820 mm
Track	610 mm	625 mm
Tyre size	16 x 6.50 x 8	16 x 6.50 x 8
Tyre pressure, front & rear	60 kPa (0.6 kp/cm2)	60 kPa (0.6 kp/cm2)
Max. gradient	15°	15°
Engine
Manufacture	Briggs & Stratton model 28B707	Briggs & Stratton model 28N707
Power	7.7/10.5 kW/h.p.	9.2/12.5 kW/h.p.
Displacement	465 cm3	465 cm3
Fuel	minimum 85 octane unleaded	minimum 85 octane unleaded
Tank volume	7 litres	7 litres
Oil	SAE 30 or SAE 10W/30	SAE 30 or SAE 10W/30
	class SF-CC	class SF-CC
Oil volume	1.4 litres	1.4 litres
Start	Electric starter	Electric starter
Electrical system

Type	12	V, negative earth
Battery	12	V, 24 Ah
Spark plug	Champion CJ8 or J8
	electrode gap = 0.7–0.8 mm

12 V, negative earth

12 V, 24 Ah Champion CJ8 or J8 electrode gap = 0.7–0.8 mm

Transmission
Manufacture	Peerless typ MST 205	Tuff Torq K46
Oil		SAE 10W/30, class SF-CC
No. of forward gears	5
No. of reverse gears	1
Speed in forward gears	1.85-8.9 km/h	0-9 km/h
Speed in reverse	2.5 km/h	0-6 km/h
Cutting unit
Type	3-blade unit with rear ejection	3-blade unit with rear ejection
Cutting width	850 mm	850 mm
Cutting height	9 pos. 40–90 mm	9 pos. 40–90 mm
Blade diameter	304 mm	304 mm
NOISE LEVEL	100 dB(A)	100 dB(A)

We reserve the right to change technical specifications without prior notice.

Note that no legal claims are valid on the basis of information in this manual.

Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.

36 – English

Image 37

Husqvarna 11 Bio/13 H Bio Technical Data, Dimensions, Rider 13 H, Engine, Electrical system, Transmission, Noise Level

Contents

Rider 11/13 H Rider 11 Bio/13 H Bio 101Operator´s manual Rider 11 Bio and Rider 13 H Bio CONTENTS Operator’s Manual for Rider 11 and Rider 13 HIMPORTANT INFORMATION Travel and transport on public roadsEXPLANATION OF SYMBOLS General use SAFETY INSTRUCTIONSRead the instructions before starting the machine Clear the area from stones etc. before cuttingDriving on slopes Be extra careful when driving on slopesDo as follows Cut slopes upwards and downwards, not sidewaysChildren MaintenanceKeep children away from the mowing area Never allow children to drive the machineSAFETY INSTRUCTIONS Clean the machine regularly from grass, leaves and other wastebattery can explode and cause severe injuries before starting the engine. If fuel is spilt on clothes, change themPresentation PRESENTATIONLocation of the controls Throttle and Choke lever PRESENTATION RIDER 11 / 11 BIOClutch pedal Brake pedal / Parking brakeSpeed limiter PRESENTATION RIDER 13 H / 13 H BIOParking brake Throttle and Choke leverLift lever for cutting unit Cutting unitRider 11 Bio and Rider 13 H Bio have a twin-blade Lifting of the cutting unit transport positionSeat Lever for adjustment of cutting heightFuelling Rider 13 HBefore starting DRIVINGStarting the engine Rider 13 HWarm engine Cold engineDRIVING 5. Set the throttle control midway between position 1 and2. For Rider 13 H and Rider 13 H Bio Driving the machineFor Rider 11 and Rider 11 Bio The clutch must be used for each gear changeMowing pattern Cutting tipsDRIVING IMPORTANT INFORMATIONStopping the engine Hill start, manual gearboxRelease lever Rider 13 H and Rider 13 H Bio DRIVINGMaintenance schedule MAINTENANCEMaintenance interval MaintenanceEngine hood Dismantling of the machine hoodsFront hood Rider 11 and Rider 13 H Front hood Rider 11 Bio and Rider 13 H BioLeft-hand fender Right-hand fenderMAINTENANCE Release the screws in the fender and lift off the fenderCheck the engine’s cooling air intake Check the engine’s oil levelChecking of the fuel pump’s air filter MAINTENANCEMAINTENANCE Checking and adjustment of the steering wiresCheck and adjust the brakes on Rider 13 H and Rider 13 H Bio Adjusting the brake Rider 11 and Rider 11 BioPoorly adjusted brakes can result in reduced braking power Checking the brake Rider 11 and Rider 11 BioCheck the safety system Check the level of the battery acidProcedures on contact with acid Check the transmission’s oil level Rider 13 H and Rider 13 H BioReplacing the air filter Do not use compressed air to clean the paper filterMAINTENANCE IMPORTANT INFORMATIONMAINTENANCE Checking the cutting unit’s parallelismMAINTENANCE Adjustment of the cutting unit’s parallelismService position for BioClip MAINTENANCE RIDER 11/11 BIOPlacing in service position 5. Disengage the spring from the drive belt tensioning wheel MAINTENANCE RIDER 11/11 BIOMAINTENANCE RIDER 11/11 BIO Restoring from service position7. Lift off the drive belt 1. Then pull out the pin Take care not to get your hand trappedChecking the tyre pressure Checking the bladesCutting unit rear ejection Bio MAINTENANCELubrication Rider 11 and Rider 11 Bio Changing the oilLubrication of front wheel bearings Check that the lock-ring is correctly posi- tioned in the slotGeneral lubrication Lubrication of belt tensionerMAINTENANCE 32 - EnglishReplacement of the fuel filter Checking and adjustment of the throttle wireMAINTENANCE Problem TROUBLE SHOOTING SCHEDULEProcedure STORAGE ServiceWinter storage Dimensions TECHNICAL DATARider Rider 13 HRider 13 H Bio Rider 11 BioTECHNICAL DATA DimensionsDirective 89/392/EEC, Annex II, A EU declaration of conformity Only applies to EuropeSvenska ´*3,¶6X¨ Svenska ´*3,¶6X¨ 2000W37