2. PRESENTATION
Working method
The robotic lawnmower automatically mows the lawn. It continuously alternates between mowing and charging.
The robotic lawnmower starts to search for the charging station when the battery charge becomes too low. The robotic lawnmower does not mow when it is searching for the charging station.
When the robotic lawnmower searches for the charging station, it first searches irregularly for the guide wire. Then it follows the guide wire to the charging station, turns around just in front of the station and backs into it.
When the battery is fully charged, the robotic lawnmower leaves the charging station in a randomly selected direction within the
In order to ensure an even cut, even in parts of the garden that are hard to reach, there are a number of manual settings for how the robotic lawnmower is to leave the charging station. See 6.4 Installation.
When the robotic lawnmower body hits an obstacle, the robotic lawnmower reverses and selects a new direction.
Two sensors, one on the front and one on the back of the robotic lawnmower, will sense when the robotic lawnmower is approaching the boundary wire. The robotic lawnmower travels up to 11” (28 cm) beyond the wire before it turns around.
The STOP button on the top of the robotic lawnmower is mainly used to stop the robotic lawnmower when it’s running. When the STOP button is pressed a cover opens, behind which there is a control panel. The STOP button remains pressed in until the cover is closed again. This acts as a start inhibitor.
