3. INSTALLATION
•- In the passage, the guide wire must therefore be placed so that the robotic lawnmower has as much space to run in as possible. The distance between the boundary loop and the guide wire must however be at least 12”
(30 cm).
If the guide wire has to be installed on a steep slope, it is an advantage to lay the wire at an angle to the slope. This makes it easier for the robotic lawnmower to follow the guide wire on the slope.
Avoid laying the wire at sharp angles. This can make it difficult for the robotic lawnmower to follow the guide wire.
4.Run the guide wire to the point on the boundary loop where you wish to make the connection.
5.Lift up the boundary wire. Cut the boundary wire using for instance a pair of wire cutters.
Maximum distance
At least 30 cm
At least 2 m
135º
135º
90º
English - 31