BAGGER ASSEMBLY
EXTENDER |
LANYARD |
PIN |
DT13 |
FIGURE 6
EXTENDER |
SPRING |
LOWER HANDLE |
UPPER BOLT |
DT15 |
FIGURE 8
18.Place door in position and set the hinge bolts. DO NOT tighten the bolts, leave at least 1/16" space. Thread nut on to the bolt. See Figure
BOLT |
NUT |
DT14 |
FIGURE 7
20.Attach upper handle to the extenders.
21.Attach upper end of cable to the handle and install cable through clutch bail. Fit clutch bail into the handle. See Figure 9.
DT16
FIGURE 9
19.Remove upper bolt from lower handle and rotate handle toward the ground. Using the hardware provided install the spring to the extender. Rotate handle back to original position stretching spring,
43
