SEEDER ASSEMBLY
20.Attach the cable with a wire tie farther up the handle.
21.Check adjustment of the cable by tipping unit forward confirming that when the control le- ver is in the closed position the seedgate is fully closed.
If the seedgate needs adjusting, loosen the screw and nut holding the cable clamp. Move the cable back or forward in the clamp until the seedgate is fully closed when the control lever is in the closed postion. DO NOT move the seedgate with your hand, use the cable to move the seedgate for a more accurate ad- justment.
22.To check the seed dial adjustment , insert a 1/8" drill bit into one of the holes in the seed gate, the seed dial should read 3 1/2. If not, adjust the cable by loosening the screw and nut holding the cable clamp. Move the cable back or forward in the clamp until the seed dial reads 3 1/2.
SEED GATE | CABLE CLAMP |
| DT25 |
FIGURE 7
23.Make sure the cable moves freely. NEVER kink the cable.
24.
48
