SYMBOLS AND DECALS
Translation of instructions
Decal 7
Seed application chart
Values are approximate; quantities of seed depend on the speed at which the machine is run. Faster running speed results in sparser sowing.
Preparing the lawn
•Cut the grass to approximately
•Do not water before sowing.
•Remove the layer of old grass cuttings (thatch).
•Aerate the lawn with a ground aerator of the coring type.
•Fertilize the lawn.
Seed application recommendations
•For best results, sow in two directions with a 45° angle between.
•Water generously immediately afterward and continue watering moderately for
•After germination, water sporadically to encourage root growth.
Decal 8
Warning
Engine exhaust, some of its constituents and certain vehicle components contain or emit chemicals considered by the State of California to cause cancer, birth defects or other reproductive harm.The engine emits carbon monoxide, which is a colorless, poisonous gas. Do not use the machine in enclosed spaces.
Decal 3
Important information
Read and make sure you understand the Operator’s Manual before use or maintenance.
To obtain a replacement manual, please contact your dealer.
Observe all safety instructions; otherwise you may injure yourself or others around you.
Make sure that the machine is in serviceable condition prior to use.
Make sure that all protective devices are in place when the machine is in use.
Stop the engine and wait until all machine movement comes to a standstill before service, adjustment or cleaning.
Do not run the engine in poorly ventilated spaces.
Make sure nobody is in the vicinity of the machine before starting and during use.
Avoid slopes that are too steep to use the machine safely.
Clear any debris from the lawn prior to use.
6
