Depth knob with depth lock, Blades, Depth lever | Husqvarna DT22

LUBRICATION

2. Depth knob with depth lock

Lubricate the threads regularly with grease to avoid binding or locking. It is particularly important to lubricate the threads after cleaning.

DT03

3. Blades

Cover the blades with a thin coat of oil to avoid rust. This is particularly important prior to winter storage or if the machine will not be used for a period of longer than 30 days.

4. Depth lever

It is important to lubricate all links and joints so that they do not bind. Use 30W engine oil.

DT05

5. Handle

Lubricate the joints at both sides of the handle with an oil can.

DT06

36

Image 36

Husqvarna DT22 manual Depth knob with depth lock, Blades, Depth lever, Handle

Contents

DT22 Table of Contents Introduction Symbols and Decals Decals and machine-bound instructions Location of decals Decal Seed application chart Translation of instructions Safety Instructions General use Safety Instructions Preparations Running Movement/Transport StorageChildren Fuel system Maintenance Presentation Presentation Main components and operating instruments Engine Throttle control Starter Starter handleFuel valve Choke Spark plug MufflerOil dipstick Oil drainage Fuel tank Fueling Cutting unit Depth lever Depth knobDepth lock Clutch Setting blade height Blade versatilityFlail blade Delta blade Operation Starting the engine Cutting the engine Before you start StartingFinishing Maintenance Maintenance schedule Replacing the air filter Cleaning the sludge reservoir Idle adjustment Ignition system Fitting the wrong spark plug type can damage the engine Cutting unit Checking the drive beltReplacing the drive belt Wear/Rotation/Replacing flail blades When tipping the machine forward observe the Two minute rule Replacing worn flail blades Wear/Replacing delta blades Screws Delta BladeNuts Wear/Replacing spring tines Spring Tine Screw Cleaning and washing Two minute rule Lubrication Lubrication scheduleGeneral Engine oil Checking the engine’s oil level Depth knob with depth lock BladesDepth lever Handle Troubleshooting Symptom Cause Engine will not start Service StorageWinter storage Technical Data Specifications DT22 Assembly Instructions Assembly delivery service Bagger Assembly Assembly directions, catcher bag Attach the chute to the mainframe Extender Wire tie the cable to the handle. See Correct height setting Instructions for the catcher bagCollection conditions Seeder Assembly Do not use or start the engine until the seeder is in place Re-attach rubber flap rod with push nut to Seed Gate Cable Clamp Adjusting the seed hopper Instructions for the seeder Service Journal Delivery serviceAfter the first 20 hours Sound Test Vibraton LevelPage Page ´z+H3J¶6T¨ Page 114 01 2003W10