Assembly: guide rail, guide rail strut, cross beam
| B |
| 6 |
| 5 |
C | 7 |
|
(5)Place the guide rail on the long legs, pressing the guide rail down while the bolts are tighte- ned. (4 x M6x20 collar bolts, 4 x M6 collar nuts)
Check that the angle between the guide rail and
the long leg is 90°.
(6)Fit the strut to the inside (D) of the guide rail flanges with the oval hole up. (4 x M6x20 collar bolts, 4 x M6 collar nuts)
(7)Fit the cross beam. In each leg there are six holes. The inner ones are used for the standard M7 unit (C), while the others are used when the M7 is extended and an additional cross beam is fitted on either side. (6 x M6x20 collar bolts, 6 x M6 square nuts)
11
