Husqvarna M7 manual Assembly saw carriage

Assembly: saw carriage

21

19

20

(19)Insert bolts through the

holes along the sides of both the chain-saw bed (pylon) and the spool holder plate. Turn the square nuts a few times. (8x M6x16 bolts, 8 x M6 square nuts)

(20)Insert the square nuts into the slide rail track, moving the spool holder plate and the chain-saw bed to opposite ends of the slide rails. Tighten the bolts.

(21)Thread the line spool over the spool holder arm and tighten the nut. (1 x M10 locking nut)

15