Husqvarna M7 manual Assembly chain guard, Assembly extender nuts

Assembly: chain guard

22

(22)Fit the chain guard on the support and bolt. (2 x M6x40 collar bolts, 2 x M6 locking nuts)

Assembly: extender nuts

23

24

16

Remove the two bolts holding the guide bar and remove the guide bar cover.

(23)Remove the bark grips, leaving the bolts and retightening the nuts.

(24)Refit the guide bar cover, replacing the guide bar bolts with the two extender nuts. The guide bar nuts will be used to fasten the chain-saw to the carriage.

Only CE-approved chain- saws with two guide bar

nuts may be used with the M7 sawmill.