Presentation | Husqvarna Pro 18 guide

PRESENTATION

Location of the controls Pro 18

1.	Switch for the power outlet	9.	Chronometer
2.	Power outlet	10.	Speed limiter for reversing
3.	Throttle control - regulates the engine speed	11.	Speed limiter for driving forward
4.	Switch for the lights	12.	Parking brake
5.	Choke lever	13.	Lock button for parking brake
6.	Ignition lock	14.	Lever for adjustment of seat
7.	Lever for adjustment of cutting height	15.	Fuel tank cap
8.	Lifting lever for cutting unit with lock button	16.	Main lock
		17.	Lever to disengage the drive

English – 13

Image 14

Husqvarna Pro 18 manual Presentation

Contents

Rider Pro 15 Rider Pro Contents Driving and transport on public roads InstructionDear customer Towing Serial number Safety InstructionsGood service Explanation of Symbols Read the instructions Safety instructions General use Keep children away from the area to be mowed Driving on slopes Proceed as follows Maintenance Children Do not smoke when carrying out maintenance Transport Speed limiter PresentationPresentation Cutting unit Location of the controls Pro Presentation Choke lever Presentation PROThrottle control Chronometer Lever for adjustment of the cutting height Lift lever for cutting unit Fuelling Parking brakeSeat Throttle control Lift lever for cutting unit Lights and power outlet Release lever DrivingCutting tips Starting the engine Driving PROBefore starting Driving PRO Driving the machine Stopping the engine Before starting Driving PRO Driving the machine Stopping the engine Year MaintenanceMaintenance schedule Year 100 300 Front cover Removing of the machine hoodsEngine cover Pro Transmission cover Right-hand fender Pro Left-hand fender Pro Checking and adjustment of the steering wires Checking and adjusting the choke wire Adjusting the parking brakeChecking and adjustment of the throttle wire Poorly adjusted brakes can result in reduced braking power Replacement of the fuel filter Pro Muffler air intake Cleaning the pulse air filterChecking of the fuel pump’s air filter Check the transmission’s air intake Replacing the air filter Pro Maintenance Cleaning the engine and muffler Checking the engine’s cooling air intake Fitting the wrong spark plug type can damage the engine Check the level of the battery acidProcedures on contact with acid Inspecting the safety system Replacing the light bulbs, Pro Fuses Checking the tyre pressure Fitting the cutting unit Observe caution to avoid trapping your hand Installing BioClip Removing the cutting unit Checking and adjusting the cutting unit’s ground pressure Cutting Height Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitBelt replacement on BioClip Replacing the cutting unit belt Belt change on Combi Maintenance Service position for the cutting unit Placing in service position Maintenance Restoring from service position Checking the blades Replacing the break-pin BioClip 90, Combi Removal of BioClip plug Combi Lubrication chart Lubrication Lubrication Lubricating wires General Pedal mechanism in frame tunnel Pro Driver’s seat Chains in frame tunnelTriangular link and joints Throttle and choke wires, lever bearings Belt tensioner Engine oil Gear lever Changing the engine oil Transmission Parking brake wireTransmission oil level Replacing the oil filter Hydraulic oil filter, change Trouble Shooting Schedule Problem Procedure Winter storage ServiceStorage Cover Wiring Diagram PRO BL = BR = Technical Data Combi Cutting unit BioClipSide ejector Rear ejector EU-DECLARATION of Conformity EU declaration of conformity Only applies to Europe Work done ServicejournalPre-delivery service Hour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´z+H.6¶6*¨ Page 114 01 2003W07