Right-hand fender Pro, Left-hand fender Pro | Husqvarna Pro 18

MAINTENANCE

Right-hand fender Pro 15

Dismantle the foot-plate (1), screws (2 and 3), and lift off the fender.

Left-hand fender Pro 15

Dismantle the screws (1 and 2), and lift off the fender.

3

2

11

Right-hand fender Pro 18

Dismantle the foot-plate (1), screws (2 and 3), and lift off the fender.

Left-hand fender Pro 18

Dismantle the screws (1 and 2), and lift off the fender.

32 – English

Image 33

Husqvarna Pro 18 manual Right-hand fender Pro, Left-hand fender Pro

Contents

Rider Pro 15 Rider Pro Contents Dear customer InstructionDriving and transport on public roads Towing Safety Instructions Good serviceSerial number Read the instructions Explanation of Symbols General use Safety instructions Keep children away from the area to be mowed Proceed as follows Driving on slopes Children Maintenance Do not smoke when carrying out maintenance Transport Presentation PresentationSpeed limiter Location of the controls Pro Cutting unit Presentation Throttle control Presentation PROChoke lever Chronometer Lift lever for cutting unit Lever for adjustment of the cutting height Parking brake SeatFuelling Throttle control Lift lever for cutting unit Lights and power outlet Driving Cutting tipsRelease lever Driving PRO Before startingStarting the engine Driving PRO Driving the machine Stopping the engine Before starting Driving PRO Driving the machine Stopping the engine Maintenance Maintenance scheduleYear Year 100 300 Engine cover Pro Removing of the machine hoodsFront cover Transmission cover Left-hand fender Pro Right-hand fender Pro Checking and adjustment of the steering wires Checking and adjustment of the throttle wire Adjusting the parking brakeChecking and adjusting the choke wire Poorly adjusted brakes can result in reduced braking power Replacement of the fuel filter Pro Checking of the fuel pump’s air filter Cleaning the pulse air filterMuffler air intake Check the transmission’s air intake Replacing the air filter Pro Maintenance Checking the engine’s cooling air intake Cleaning the engine and muffler Check the level of the battery acid Procedures on contact with acidFitting the wrong spark plug type can damage the engine Inspecting the safety system Replacing the light bulbs, Pro Checking the tyre pressure Fuses Observe caution to avoid trapping your hand Fitting the cutting unit Removing the cutting unit Installing BioClip Cutting Height Checking and adjusting the cutting unit’s ground pressure Belt replacement on BioClip Adjusting the parallelism of the cutting unitChecking the cutting unit’s parallelism Replacing the cutting unit belt Belt change on Combi Maintenance Placing in service position Service position for the cutting unit Maintenance Restoring from service position Checking the blades Removal of BioClip plug Combi Replacing the break-pin BioClip 90, Combi Lubrication Lubrication chart Lubrication General Lubricating wires Pedal mechanism in frame tunnel Pro Chains in frame tunnel Triangular link and jointsDriver’s seat Belt tensioner Throttle and choke wires, lever bearings Engine oil Changing the engine oil Gear lever Parking brake wire Transmission oil levelTransmission Hydraulic oil filter, change Replacing the oil filter Problem Procedure Trouble Shooting Schedule Storage ServiceWinter storage Cover BL = Wiring Diagram PRO BR = Technical Data Cutting unit BioClip Side ejector Rear ejectorCombi EU declaration of conformity Only applies to Europe EU-DECLARATION of Conformity Servicejournal Pre-delivery serviceWork done Hour service Servicejournal 100/200 hour service Servicejournal At least once a season Work done Date, mileage, stamp, sign Servicejournal ´z+H.6¶6*¨ Page 2003W07 114 01