SERVICEJOURNAL
Work done | Date, mileage, stamp, sign |
Pre-delivery service
1. Top up battery with acid and recharge for four hours.
2. Fit steering wheel, seat and any optional equipment.
3. Fit cutting unit.
4. Adjust cutting unit:
Adjust lift springs (effective weight of cutting unit should be
Adjust cutting unit so that rear edge is about
Adjust cutting unit height setting so that cutting height limit is 5
mmabove the frame of the unit at the lowest cutting height.
5.Check that the oil levels in the engine and transmission are
correct.
6. Check and adjust tyre pressure (60 kPa, 0.6 bar). |
|
7. Connect battery. |
|
8. Fill with fuel and start engine. |
|
9. Check that machine does not move in neutral. |
|
10. Check: |
|
Forward drive. |
|
Reverse drive. |
|
Operation of blades. |
|
Seat safety switch. |
|
Lift lever safety switch. |
|
Safety switch for the hydrostat pedals. |
|
11. Check engine revs 3,000 ±75 rpm. |
|
12. Tell customer about: | |
Need and benefits of following the service schedule. | No outstanding problems. |
| |
Need and benefits of having machine serviced every 300 | Certified: |
| |
hours. |
|
Servicing and the influence of this journal on the |
|
value of the machine. |
|
Range of applications for BioClip. |
|
13. Complete proof of sale, etc. |
|
After first 8 hours 1. Change engine oil.
72 – English
