PRESENTATION PRO 15
Lift lever for cutting unit
The lift lever is used to set the cutting unit in trans- port or mowing position.
1.Pull back the lever to the locked position for transport.
The cutting unit will lift up and the blades stop rotating.
2.Press in the lock button and move the lever forwards for the mowing position.
The unit will lower down and the blades start to rotate.
3.The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.
Lifting of the cutting unit
Lowering of the cutting unit
Lever for adjustment of the cutting height
The cutting height can be adjusted to 9 different positions with the cutting height lever.
Rear and side ejector unit | |
| (1 9/16" - 3 9/16") |
BioClip and Combi unit | |
| (1 3/4" - 3 3/4") |
English – 15 |
