LUBRICATION
10. Parking brake wire
Remove the transmission cover; see ”Gear lever”.
Unhook spring (A) from screw (B) if necessary.
Push the rubber protector aside to lubricate the wire.
Lubricate the wire using an oil can, press the brake pedal a few times and lubricate again.
Refit spring (A) and the transmission cover.
11. Transmission oil level
1.Check the level of the transmission oil by looking through the air intake mesh. The oil level should be between the ”MIN” and ”MAX” marks on the oil reservoir at 20°C.
If it is necessary to top up the oil you must remove the transmission cover first.
2.Unscrew the cap from the oil reservoir and top up with SAE 10W/30 grade engine oil, class SF– CC, until the oil level reaches the ”MAX” mark. Screw the cap back onto the oil reservoir and refit the transmission cover.
12. Transmission
The oil should be changed by an authorised service workshop, and is described in the Workshop Manual.
Filter replacement on Pro 18 is done at the same time as changing the oil.
A
B
English – 63
