![](/images/new-backgrounds/1111473/11147377x1.webp)
MAINTENANCE
Adjusting the brake
Overcentering type handle activites brakes.
Undo clevis pin from brake and turn clockwise to tighten brake or counter clockwise to loosen.
Tighten so handle snaps down when locked but unlocks easily when handle is moved forward. Brake is properly adjusted when wheel will not turn when you try to push or pull unit.
HAIR PIN |
CLEVIS PIN |
Two minute rule
The machine may be tipped backward or on its side to facilitate access for cleaning or service, but no longer than 2 minutes.
If the machine is held in this position for too long, the engine can be damaged by gasoline draining into the crankcase. Should this happen, perform an extra oil change on the engine. Remove the spark plug and turn the engine over a few revolutions with the starter handle before starting the engine again.
Cleaning and washing
Regular cleaning and washing will increase the machine’s lifespan. Make it a habit to clean the machine directly after use, before the dirt sticks.
Check before rinsing that the fuel tank lid is properly in place to avoid getting water in the tank.
Use caution when using
Lubricate the machine after cleaning. This is particularly important if the machine is to be stored.
39