Husqvarna SG13/968999353 manual Engine switch on the handle, Dead man’s grip bar, Starter handle

OPERATION

Engine switch on the handle

Set the toggle switch to ON.

Dead man’s grip bar

Hold in the bar for the dead man’s grip against the handle.

8011-185

Starter handle

The dead man’s grip must be pressed in when starting the engine.

Misuse of the starter handle can damage the starter. DO NOT twist the starter cord around your hand.

Pull out the handle slowly until the gears mesh. Then give a sharp pull on the starter handle. DO NOT pull out the starter cord completely and DO NOT let go of the starter handle when extended.

Throttle

Keep the throttle at idle. When the throttle is increased, the cutting wheel will begin rotating.

8011-127

25