Husqvarna SG13/968999353 manual Replacing the air filter, Maintenance, Important Information

Models: SG13/968999353 SG13A, SG13

1 50
Download 50 pages 16.43 Kb
Page 33
Image 33
Replacing the air filter

MAINTENANCE

Replacing the air filter

If the engine seems weak, produces black smoke or runs unevenly, the air filter may be clogged. For this reason, it is important to clean and replace the air filter regularly (see the maintenance schedule for the proper service interval).

DO NOT wash the paper filter. DO NOT oil the paper filter. WARNING!

Allow the exhaust system to cool before performing service. Risk for burns.

Cleaning/replacement of the air filter is carried out as follows:

1. Undo the wing nut (1) and lift off the cyclone filter with the air filter cowling (2).

2. Remove the foam rubber pre-filter and clean using a mild detergent.

Squeeze it dry with a clean cloth.

Soak it with new engine oil. Wind the filter in an absorbent cloth and squeeze out excess oil.

3.Remove the wing nut in the air filter and remove the paper filter. Tap the paper filter against a fixed surface to remove dust. If the paper filter

is still dirty or damaged, it MUST be replaced.

IMPORTANT INFORMATION

DO NOT use compressed air over 2 bar/ 30 PSI to clean the paper filter.

DO NOT wash the paper filter. DO NOT oil the paper filter.

4. Refit the air filter as follows:

Mount the paper filter in the air filter housing and tighten the wing nut.

5. Refit the pre-filter on the paper filter.

6. Refit the cyclone filter with the air filter cowling.

8011-188

8011-030

8011-031

8011-032

33

Page 33
Image 33
Husqvarna SG13/968999353 Replacing the air filter, DO NOT wash the paper filter. DO NOT oil the paper filter, Maintenance