Husqvarna SG13B manual Handle Engine Switch, OP Grip Bar, Engine ON/OFF Switch

operation

Handle Engine Switch

Set the toggle switch to ON.

Engine ON/OFF Switch

The switch on the engine is disconnected. Use the Handle Engine Switch.

ON

OFF

8060-026

OP Grip Bar

Hold in the bar for the OP grip bar against the handle.

8060-029

Starter Handle

The OP grip bar must be held against the handle when starting the engine.

Misuse of the starter handle can damage the starter. DO NOT twist the starter cord around your hand.

Pull out the handle slowly until the gears mesh. Then give a sharp pull on the starter handle. DO NOT pull out the starter cord completely and DO NOT let go of the starter handle when extended. Return the handle to the recoil position.

Throttle

Keep the throttle at idle. When the throttle is increased, the cutting wheel will begin rotating.

8011-127

28 - HUSQVARNA