hussman CR3HTO-HTB Glass Breakage, May Occur, Retighten glass along clamshell, temperature, Chino

IGFC-CR3H-HTB-1104

	General Instructions
Table of Contents		THIS BOOKLET CONTAINS INFORMATION ON:
General Instructions	2
		CR3HTB-HTO:Hot Countertop Service Case available in
Case Drawings	3	3, 4, and 5 foot lenghts.
NSF Installation Note	3

LEVELING	4
Electrical	4
WIRING COLOR CODE	4
Maintenance	5
PLEXIGLASS & ACRYLIC CARE	5
GLASS	5
Lift-up Glass Maintenance	6
TIPS & TROUBLESHOOTING	7

SHIPPING DAMAGE

All equipment should be thoroughly examined for shipping damage before and during unloading.

This equipment has been carefully inspected at our factory and the carrier has assumed responsibility for safe arrival. If damaged, either apparent or concealed, claim must be made to the carrier.

User Information	7
Food Handling and Hot Food Equipment	7
Eletrical Specifications	9
Wiring Diagrams	10
APPENDICES	14
APPENDIX A. – Temperature Guidelines	14
APPENDIX B. – Application Recommendations	14
APPENDIX C. – Field Recommendations -	14
APPENDIX D. – Recommendations to user	14
Warranty	17

APPARENT LOSS OR DAMAGE

If there is an obvious loss or damage, it must be noted on the freight bill or express receipt and signed by the carrier’s agent; otherwise, carrier may refuse claim. The carrier will supply necessary claim forms.

CONCEALED LOSS OR DAMAGE

When loss or damage is not apparent until after equip- ment is uncrated, a claim for concealed damage is made. Make request in writing to carrier for inspection within 15 days, and retain all packaging. The carrier will supply inspection report and required claim forms.

	SHORTAGES
	Check your shipment for any possible shortages of
	material. If a shortage should exist and is found to be
	the responsibility of Hussmann Chino, notify Hussmann
	Chino. If such a shortage involves the carrier, notify the
	carrier immediately, and request an inspection. Hussmann
	Chino will acknowledge shortages within ten days from
	receipt of equipment.
GLASS BREAKAGE	HUSSMANN CHINO PRODUCT CONTROL
	The serial number and shipping date of all equipment
MAY OCCUR!	has been recorded in Hussmann’s files for warranty and
Retighten glass along clamshell	replacement part purposes.All correspondence pertain-
	ing to warranty or parts ordering must include the serial
after leveling and first time case
is brought to full operating	number of each piece of equipment involved, in order to
temperature!	provide the customer with the correct parts.
	The Hussmann warranty is printed on the back
Keep this booklet with the case at all times for future reference.		of this guide.
/Chino		This equipment is to be installed
A publication of		to comply with the applicable
Hussmann® Chino
		NEC, Federal, State, and Local
13770 RamonaAvenue • Chino, California 91710
		Plumbing and Construction
(909) 628-8942 FAX
(909) 590-4910		Code having jurisdiction.
(800) 395-9229

2