hussman CR3HTO-HTB APPENDIX A. - Temperature Guidelines, Heat / display lamps are lighting, towel

IGFC-CR3H-HTB-1104

APPENDICES

APPENDIX A. – Temperature Guidelines

1.0Hot cases are tested to maintain all hot food at 140° - 150°. These cases are not designed to heat up or cook food. It is the user’s responsibility to stock the hot food cases immediately after the cooking of the food with a pulp temperature of at least 150° to 160°.

APPENDIX B. – Application

Recommendations

1.0The installer should perform a complete start-up evaluation prior to the loading of food into the hot food case, which includes such items as:

a)Initial temperature performance, Griddles and Hot Wells.

b)Observation of outside influences such as drafts, radiant heating from the ceiling and from lamps. Such influence should be properly corrected or compensated for.

c)Complete start-up procedures should include :

1.Heat / display lamps are lighting

2.Indicator lamps on control panel(s) are working

3.Auto-fill is functioning properly (Service cases)

4.Hot Griddles are functioning.

APPENDIX C. – Field Recommendations -

1.0The most consistent indicator of display hot case performance is temperature of the product itself.

NOTE: Public Health will use the temperature of the product in determining if the hot case will be allowed to display potentially hazardous food. For the purpose of this evaluation, product temperature above the FDA Food Code 1993 temperature for potentially hazardous food will be the first indication that an evaluation should be performed. It is expected that all hot cases will keep food at the FDA Food Code 1993 temperature to prevent the sale of potentially hazardous food.

1.1The following recommendations are made for the purpose of arriving at easily taken and understood data which, coupled with other observations, may be used to determined whether a display refrigerator is working as intended:

a)INSTRUMENT – A stainless steel stem-type thermometer is recommended and it should have a dial a minimum of 1 inch internal diameter. A test thermometer scaled only in Celsius or dually scaled in Celsius and Fahrenheit shall be accurate to 1°C (1.8°F). Temperature measuring devices that are scaled only in

towel.

10.When “freshening” foods such as macaroni and cheese with added water, heat the water in a clean container until it is 10° to 20°F above the desired holding temperature of the food. This will keep the food at a safe serving temperature. Depending on the amount of water, the temperature can drop 10° to 20° in as little as five minutes.

11.When transferring hot foods in the heated merchandiser to clean pans, preheat the clean pan. Transferring hot foods to room temperature pans can cause the temperature of the food to drop 20° or more thus causing food to be at an unsafe serving temperature.

12.Clean spills as they happen simply by wiping with a cloth. Be sure to use a dry cloth on very hot surfaces to prevent steam burns.

13.Turn the equipment off and allow to cool before cleaning.

14.To remove “baked-on” splatter from Stainless Steel, the following may be used

Grade F Italian Pumice		Scour or rub with a damp cloth
Liquid Nusteel		Scour with a small amount of a dry
		cloth
		Paste NuSteel
Household Cleaners		Rub with a damp cloth
Coopers Stainless	Steel	Cleaner
Allen Stainless Steel Polish
Fahrenheit shall be	accurate to 2°F. The thermometer should be

checked for proper calibration. (It should read 32°F when the stem is immersed in an ice water bath).

b)LOCATION – The thermometer must be inserted into the food itself to acquire proper food pulp temperature.

c)READING – The thermometer reading should be made only after it has been allowed to stabilize, i.e., maintain a constant reading.

Loading Product: Cases should be allowed to heat up for one hour before product is loaded.

Temperature adjustments: Allow 4 hours after adjustment has been made before testing pulp temperature of product.

d)OTHER OBSERVATIONS – Other observations should be made which may indicate operating problems, such as unsatisfactory product, feel/appearance.

APPENDIX D. – Recommendations to user

1.0Hussmann should provide instructions and recommendations for proper periodic cleaning. The user will be responsible for such cleaning, including the cleaning of equipment within the compartment and the hot area(s). Cleaning practices, particularly with respect to proper refrigerator unloading and warm-up, must be in accordance with applicable recommendations.

1.Allow the case to preheat for one hour prior to loading.

2.Hot foods should enter the case directly after cooking or no lower than 150° - 160°F. The Hot Cases are not designed to heat up or cook food.

3.Self Service - be sure to display product in single layer in direct contact with heating surface and/or wire rack.

4.All griddle type units are designed to maintain termperatures above the FDA guideline of 140°F. This is product temperature, not air or griddle temperature. Due to the open design of these units, they must be loaded with product for proper

14