General operations
Turning On/Off
Press any button to turn the unit on, the display will show a message “WELCOME” to indicate it is ready to use. Press and hold PWR button to turn the unit off.
Mode selection
Press MODE button to switch between Radio and CD play mode.
Volume control
The volume level can be adjusted by rotating SEL knob in any mode.
LOUD mode
Press and hold SEL knob till the display shows “TA SEEK”, then press SEL knob till “LOUD OFF” is shown. Rotate SEL knob to switch between LOUD ON or LOUD OFF. This mode is to emphasize the bass output.
Bass, treble, balance and fader control
Press SEL knob to select bass, treble, balance or fader mode. The corresponding word appears on the display. Rotate SEL knob to adjust the selected parameter. When DSP is on, treble and bass control is not available. Balance is to adjust the balance between the left and right speakers. Fader is to adjust the balance between the rear and front speakers.
12
