Radio operations

Choose Radio Band

Press BAND button to activate the Radio mode. The unit is equipped with 3 FM bands (FM1, FM2 and FM3) and 2 AM bands (MW1 and MW2). Each of the bands can store up to 6 preset stations, making total 30 preset memory stations.

Radio Tune/Seek Function

In Radio mode, press PREV/NEXT buttons to manually adjust the radio frequency.

Auto seek modes

Press and hold SEL knob until “TA SEEK” is shown on the display, then press SEL knob to cycle through the menu selections until “SEEK 1” is shown. Rotate SEL knob to select either “SEEK 1” or “SEEK 2”.

1.Seek 1: press and hold PREV/NEXT buttons for more than 1 second. The unit will seek the next strong and clear frequency station. Repeat to seek more stations in your listening area with a strong signal.

2.Seek 2: press and hold PREV/NEXT buttons for station search. The search will not cease until you release the button.

Mono/Stereo Reception Control

In FM radio mode, press and hold SEL knob till the display shows “TA SEEK”, then press SEL knob repeatedly until the display shows “MONO”. Rotate the SEL button to toggle between mono reception or stereo reception. The display will show “MONO” or “STEREO”. Improvement of reception of distant stations can be done by selecting “MONO” operation, which may cut down some reception noise.

15

Page 15
Image 15
Hyundai H-CDM8010 instruction manual Radio operations, Choose Radio Band, Radio Tune/Seek Function, Auto seek modes