3. Controller Parameter Setup | HRView Function Manual |
3.2. Hi3TB Controller
(1)For Ethernet use:
Condition setup and controller parameter should be the same as follows. The Baudrate of the Serial Port 2 should have the same setup as BD473 setup. However, the rest of the communication options should be the same as follows.
Constant Setup Group (1) → 『13: Serial Port』 → 『4: Serial Port 2』
08:09:05 | *** Serial Port #2 *** A:0 S:4 |
| |
Baudrate = <38400,19200,9600,4800,2400> | |||
Character length | = <7,8> bit | ||
Stop bit |
| = <1,2> bit | |
Parity bit |
| = <Disable,Odd,Even> | |
Echo |
| = <Disable,Enable> | |
|
|
|
|
Press [Enable]+[Arrow].
>_
Save
Condition Set → 『27: Serial Port #1』: Set as Sens
Condition Set → 『33: Serial Port #2』: Set as FileMng
08:09:05 *** Condition Set *** A:0 S:4
1:Mode =<1Step,1Cycle,Continuous>
2:Start=<Internal,External,Remote>
3:External program =<Disable,Enable>
4:Robot lock =<Disable,Enable>
5:Conveyor Oper=<Normal,Simulat.,Test>
7:Search range =[0.0]
8:Search reference Pt. record=<Off,On>
9: Speed rate=[100] | Gun =<DSBL,ENBL> |
13:Rec speed type=<Standard,[%],[mm/s]>
23:Step go/back max.speed = [250]mm/s
27:Serial port #1 =<FileMng,Sens>
Press [Enable]+[Arrow]. |
| |
>_ |
|
|
Service | Previous Next | Done |
08:09:05 *** Condition Set *** A:0 S:4
29:User coordinate = [ 0]
30:Gun search Ref.point record=<Off,On>
31: Spot welding |
33:Serial port#2 =<FileMng,Sens,BD480>
34:Base of
Press [Enable]+[Arrow]. |
| |
>_ |
|
|
Service | Previous Next | Done |